[Apr 08, 2024] 300-415 Exam Dumps - Cisco Practice Test Questions [Q22-Q43]

Share

[Apr 08, 2024] 300-415 Exam Dumps - Cisco Practice Test Questions

New Real 300-415 Exam Dumps Questions

NEW QUESTION # 22
Which two vRoute attributes should be matched or set in vSmart policies and modified by data policies? (Choose two.)

  • A. preference
  • B. site ID
  • C. VPN
  • D. origin
  • E. TLOC

Answer: C,E

Explanation:
https://www.cisco.com/c/en/us/td/docs/routers/sdwan/configuration/policies/vedge/policies- book/policy-framework.html#id_113351


NEW QUESTION # 23
An engineer configures an application-aware routing policy for a group of sites The locations depend on public and private transports The policy does not work as expected when one of the transports does not perform properly This policy is configured:

which configuration completes the policy so that it works for all locations?

  • A.
  • B.
  • C.
  • D.

Answer: A


NEW QUESTION # 24

Refer to the exhibit An engineer is getting a CTORGNMMIS error on a controller connection Which action resolves this issue?

  • A. Configure a valid certificate on vSMART
  • B. Configure a valid product ID
  • C. Configure a valid serial number on the WAN Edge
  • D. Configure a valid organization name

Answer: D


NEW QUESTION # 25
Drag and drop the definitions from the left to the configuration on the right.

Answer:

Explanation:


NEW QUESTION # 26
Which type of route advertisement of OMP can be verified?

  • A. Origin, TLOC, and service
  • B. Origin, TLOC, and VPN
  • C. OMP, VPN, and origin
  • D. OMP, TLOC, and service

Answer: D

Explanation:
https://sdwan-
docs.cisco.com/Product_Documentation/Software_Features/Release_18.2/03Routing/01Unicast_ Overlay_Routing_Overview#OMP_Route_Advertisements


NEW QUESTION # 27
Refer to the exhibit. Which two configurations are needed to get the WAN Edges registered with the controllers when certificates are used? (Choose two.)

  • A. Generate a CSR manually within vManage server.
  • B. Install the certificate received from the CA server manually on the WAN Edge.
  • C. Install the certificate received from the CA server manually on the vManage.
  • D. Request a certificate manually from the Enterprise CA server.
  • E. Generate a CSR manually on the WAN Edge.

Answer: A,C


NEW QUESTION # 28
An engineer is troubleshooting a vEdge router and identifies a "DCONFAIL ?DTLS connection failure" message. What is the problem?

  • A. memory issue
  • B. organization mismatch
  • C. connectivity issue
  • D. certificate mismatch

Answer: C

Explanation:
https://community.cisco.com/t5/networking-documents/sd-wan-routers-troubleshoot-control- connections/ta-p/3813237#toc-hId-340740870


NEW QUESTION # 29
An engineer is adding a tenant with location ID 399533345 in vManage. What is the maximum number of alphanumeric characters that is accepted in the tenant name filed?

  • A. 0
  • B. 1
  • C. 2
  • D. 3

Answer: D

Explanation:


NEW QUESTION # 30
A network engineer must configure all branches to communicate with each other through the Service Chain Firewall located at the headquarters site. Which configuration allows the engineer to accomplish this task?

  • A.
  • B.
  • C.
  • D.

Answer: B


NEW QUESTION # 31
Which pathway under Monitor > Network > Select Device is used to verify service insertion configuration?

  • A. System Status
  • B. ACL Logs
  • C. Real Time
  • D. Events

Answer: A


NEW QUESTION # 32
Which two privilege types can be assigned to a user group in vManage?

  • A. Administer
  • B. Write
  • C. Reboot
  • D. Erase
  • E. Read

Answer: B,E


NEW QUESTION # 33
What is the OMP graceful restart default value on vSmart controllers and WAN Edge routers?

  • A. 21,600 seconds
  • B. 43,200 seconds
  • C. 86,400 seconds
  • D. 604,800 seconds

Answer: B

Explanation:
Graceful Restart Timer: default is 12hours (43200 sec)
Specify how often the OMP information cache is flushed and refreshed. A timer value of 0 disables OMP graceful restart.
Range: 0 through 604800 seconds (168 hours, or 7 days) Default: 43200 seconds (12 hours)
https://www.cisco.com/c/en/us/td/docs/routers/sdwan/configuration/routing/vEdge-20-x/routing- book/m-unicast-routing.html#concept_rjl_sc2_b3b


NEW QUESTION # 34
An engineer is configuring the branch office with a 172.16.0.0/16 subnet to use DIA for Internet traffic. All other traffic must flow to the central site or branches using the MPLS circuit. Which configuration meets the requirement?

  • A.
  • B.
  • C.
  • D.

Answer: D


NEW QUESTION # 35

Refer to the exhibit. An ongineer configured OMP with an ovorlay-as of 10666. What is tho AS-PATH for prefix 104.104.104.104/32 on R1007?

  • A. 100 10666 104
  • B. 100 20 104
  • C. 100 10666
  • D. 100 10666 20 104

Answer: A


NEW QUESTION # 36
Refer to the exhibit.

The control connection is failing. Which action resolves the issue?

  • A. Upload the WAN Edge list on vManage.
  • B. import vSmart in vManager
  • C. Restore the reachability to the vSmart
  • D. Validate the certificates authenticity on vSmart

Answer: C

Explanation:
https://www.cisco.com/c/en/us/support/docs/routers/sd-wan/214509-troubleshoot-control-connections.html


NEW QUESTION # 37
How is TLOC defined?

  • A. It is represented by a unique identifier to specify a site in a SD-WAN architecture.
  • B. It is represented by a group of QoS policies applied to a WAN Edge router.
  • C. It specifies a Cisco SD-WAN overlay in a multitenant vSMART deployment.
  • D. It is a unique collection of GRE or IPsec encapsulations, link color, and system IP address.

Answer: D


NEW QUESTION # 38
What is a description of vManage NMS?

  • A. It is a software process on a dedicated WAN Edge router in the network.
  • B. It is accessible only from VPN 512 (the management VPN).
  • C. A cluster requires device templates to be created on and attached to the same server
  • D. A cluster consists of a minimum of two vManage NMSs

Answer: B

Explanation:


NEW QUESTION # 39
What is a default protocol for control plane connection?

  • A. DTLS
  • B. HTTPS
  • C. IPsec
  • D. TLS

Answer: A

Explanation:
Reference:
https://sdwan-docs.cisco.com/Product_Documentation/Software_Features/SD-WAN_Release_16.3/05Security/02Configuring_Security_Parameters


NEW QUESTION # 40
Refer to the exhibit

Refer to the exhibit A WAN Edge device was recently added to vManage but a control connection could not be established Which action resolves this issue?

  • A. Rectify the Rod CA certificate mismatch on WAN Edge devices
  • B. Send the serial number to vBond from the vManage controller.
  • C. Install the bootstrap code on WAN Edge and check for CSR
  • D. Resolve the ZTP reachability and rectify smart account credentials issue

Answer: B


NEW QUESTION # 41
Which command on a WAN Edge device displays the information about the colors present in the fabric that are learned from vSmart via OMP?

  • A. show omp tlocs
  • B. show omp peers
  • C. show omp sessions
  • D. show omp route

Answer: A

Explanation:
Section: Router Deployment
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/routers/sdwan/command/sdwan-cr-book/sdwan-cr- book_chapter_0100.html#wp1675287742


NEW QUESTION # 42

Refer to the exhibit. The network administrator has configured a centralized topology policy that results in the displayed routing table at a branch office. Which two configurations are verified by the output? [Choose two.)

  • A. The configured policy is adding a route tag of 300 to learned routes.
  • B. The routing table is for the transport VPN.
  • C. The default route is configured locally.
  • D. This routing table is from a cEdge router.
  • E. The default route is learned via OMP.

Answer: D,E


NEW QUESTION # 43
......

300-415 Certification Exam Dumps Questions in here: https://drive.google.com/open?id=1S4-XKrzJ3Cs6t3Dsz-puJU560NpnUB_t

Pass Your 300-415 Exam Easily with Accurate PDF Questions: https://www.preppdf.com/Cisco/300-415-prepaway-exam-dumps.html