[Aug-2024] HPE7-A07 Dumps PDF - HPE7-A07 Real Exam Questions Answers
HPE7-A07 Dumps 100% Pass Guarantee With Latest Demo
NEW QUESTION # 38
You recently added ClearPass as an authentication server to an HPE Aruba Networking Central group.
RADIUS authentication with Local User Roles (LUR) works fine Out the same access points cannot use Downloadable User Roles (DUR).
What should he corrected in this configuration to fa the issue with DUR?
- A. Replace the AP's expiree digital certificate using the "crypto pki-import pem serverCert" command.
- B. Add the correct IP addresses or IP subnets of the Network Access Devices(NADs) under the "Devices" tabon ClearPass
- C. Add a new Enforcement Policy of type ''WEBAUTH''on ClearPass and associate it with the matching service on ClearPass
- D. Add the correct values for "CPPM username" and "CPPM Password" m the authentication server configuration on HPEAruba Networking Central
Answer: B
Explanation:
For Downloadable User Roles (DUR) to function correctly with ClearPass, the Network Access Devices (NADs) need to be correctly defined in ClearPass under the "Devices" tab. This ensures that ClearPass can identify and communicate with the NADs to deliver the appropriate user roles. If the NADs are not correctly defined, ClearPass will not be able to provide the DURs to the access points for enforcement. This is a common configuration step that is required to integrate ClearPass with network devices for advanced role-based access control.
NEW QUESTION # 39
Exhibit.
A customer is reporting mat connectivity is Tailing for some wireless client Devices. What are your conclusions from the capture? (Select two.)
- A. The client is not receiving an IP address.
- B. The network is using WPA3-SAE key management.
- C. The client does not support beamforming.
- D. The network is using WPA2-PSK key management.
- E. The client does not have an ARP entry for me default gateway.
Answer: A,D
Explanation:
The capture shows messages related to WPA key management, indicating WPA2-PSK is being used. Also, the capture includes a DHCP request from the client but no corresponding DHCP ACK, suggesting the client is not receiving an IP address, which could explain the connectivity failure.
NEW QUESTION # 40
A customer has interfering devices that are seen over the air. They contact you and ask you to configure RAPIDS to help identify interfering and rogue APs. HPE Aruba Networking Central identifies a rogue AP and displays the connected switch port.
How can HPE Aruba Networking Central identify which switch port the AP is connected to?
- A. from the switch MAC address table
- B. device profiting on the switch
- C. from the switch LLDP neighbors table
- D. from the AP MAC address table
Answer: A
Explanation:
HPE Aruba Networking Central can identify which switch port a rogue AP is connected to by using the switch's MAC address table. The MAC address table contains the associations between MAC addresses and the switch ports to which devices (including APs) are connected. When Aruba Central detects a rogue AP, it can look up the MAC address of the rogue AP in the switch's MAC address table to find the specific switch port it is connected to. This enables network administrators to quickly locate and address the rogue AP issue.
NEW QUESTION # 41
Which option shows the correct Banawidth Control for 1024 kbpsdown and 2048 Kops up for the SSID?
- A.
- B.
- C.
- D.
Answer: B
Explanation:
The correct Bandwidth Control settings for 1024 Kbps down and 2048 Kbps up for the SSID are shown in Option D. In Option D, the downstream is set at 1024 Kbps and the upstream at 2048 Kbps, both configured per user, which matches the requested configuration. This setup ensures that each user has a guaranteed bandwidth allocation of the specified rates when connected to the SSID, providing a controlled and predictable user experience.
NEW QUESTION # 42
in a WLAN network with a tunneled SSID. you see the following events in HPE Aruba Networking Central:
The customer asks you to investigate log messages What should you tell them?
- A. This indicates a client WLAN driver issue for the client with a MAC address ending with 37:18
:Od. You should upgrade the client WLAN driver. - B. This is normal, expected behavior. No further actions are needed.
- C. There is a roaming issue Enable Fast Roaming 802.11r and OKC to resolve the issue.
- D. This indicates a security issue. The client with a MAC address ending with 37 18;0d Is performing a Denial-of-Service attack on your network. You should track down the client and remove it from the network.
Answer: B
Explanation:
The event log showing PMK (Pairwise Master Key) and OKC (Opportunistic Key Caching) key add/update and delete operations is indicative of normal client behavior in a WLAN environment. These events are part of the standard process for maintaining client session security and do not necessarily indicate any issue.
NEW QUESTION # 43
A deployment using AP-635S is connectedto a stack of CX 6300s as shown.
The output of the snow LACPinterfaces shews the following:
What is causing this issue?
- A. e0 is connected to a smart rate interface, and e1 is connected to a non-smart rate interface.
- B. Each AP interface is connected to a routed-only interlace on different networks
- C. Spanning tree and loop protect are enabled on both AP uplink ports.
- D. The AP is configured with LACP active
Answer: D
Explanation:
In an Aruba deployment, if an AP's interfaces show different LACP states, it often indicates a configuration mismatch. If one interface is up and the other is blocked as shown in the output,it's likely due to both interfaces on the AP being set to LACP active mode, which is a correct setting for establishing an LACP channel with Aruba switches like the CX 6300 series.
NEW QUESTION # 44
A customer is deploying a new warehouse with AP-634 APs inthe unitedStates with mobile devices that can operate in the 6GHz spectrum All testing and RF analyses were performed during the POC using AP-635 APs In a different location During the deployment, they noticed fewer 6GHz channels were broadcasting in the air.
Why would the AP-634 deployment have a lesser amount of broadcasting channels?
- A. The AP-634 APs do not have an advanced subscription.
- B. The AP-634 AP's persona was configured in the Central group as Standard Power.
- C. The AP-634 APs cannot broadcast an 6Gnz channels due to regulatory restrictions.
- D. The AP-635 APs received different allowable 6GHz channels from the AFC service versus the AP-634 APs due to the POC running in a different location.
Answer: D
Explanation:
In the United States, the operation in the 6GHz band for Wi-Fi devices such as the AP-634 and AP-635 is regulated by the Automated Frequency Coordination (AFC) system, which determines the channels that can be used based on the location. Since the Proof of Concept (POC) was conducted in a different location using AP-635 APs, the allowable channels identified by the AFC service for that location would be different than the channels allowed for the actual deployment location of the AP-634 APs. This would result in a different set of broadcasting channels being available for use in the new warehouse deployment.
NEW QUESTION # 45
Anetworkadministrator accesses HPE Aruba Networking Central and notices that visitors consume too much internet bandwidth starving employee traffic when accessing an external service.Therefore,the administrator wants to limitwireless bandwidth to 60 Mops in both directions among all users in the voice rote and no more than 10 Mops in both directions for YouTube traffic. Deep packet inspection, web contentclassification, andfirewall visibility are enabled.
Which configurations are required to accomplish this task? (Select two.)
- A.
- B.
- C.
- D.
Answer: A,C
Explanation:
To achieve the bandwidth limits set by the network administrator, both per-application and total limits need to be configured. Option B shows the configuration for setting a per-application bandwidth limit, which can restrict YouTube traffic to 10 Mbps in both directions. Option D shows the configuration for setting a total bandwidth limit for all users within the voice role to 50000 Kbps (or 50 Mbps), satisfying the requirement to restrict total wireless bandwidth. By applying these configurations in HPE Aruba Networking Central, the administrator will successfully implement the necessary controls to ensure that visitor traffic does not impede the network performance for employee traffic, aligning with the capabilities of Aruba solutions to manage and prioritize network resources effectively.
NEW QUESTION # 46
Exhibit.
A university runs its own TV station in the city The IT department deploys a multimedia server so the TV productions can be sent out to the entire campus over the IP network using multicast-based communications in order to improve the bandwidth consumption. PlM sparse Mode and IGMP snooping features are enabled.
When wireless users join the multicast groups, all users connected to the same WLAN experience poor network performance. However, wired users are not affected in this way While troubleshooting the network administrator saves the packet captures shown in the exhibit and concludes that all users even those not joining the multicast group, receive the same multicast flow at slow speeds.
Which features should the network administrator enable to fix the problem?
- A. ARP broadcast conversion into unicast and Multicast Transmission Optimization
- B. Dynamic Multicast Optimization and UCC QoS correction
- C. Dynamic Multicast Optimization and Multicast Transmission Optimization
- D. UCC QoS correction and Multicast Transmission Optimization
Answer: C
Explanation:
Dynamic Multicast Optimization (DMO) and Multicast Transmission Optimization are features that can help address issues with multicast traffic in wireless environments. DMO optimizes the way multicast traffic is transmitted over the air by converting multicast streams into unicast streams to the clients that need them. This reduces unnecessary traffic for clients that have not subscribed to the multicast group and can improve overall network performance. Multicast Transmission Optimization adjusts the transmission rate of multicast frames to ensure they are sent at optimal speeds, addressing the issue of multicast flow being received at slow speeds by all users.
NEW QUESTION # 47
You configured a tunneled SSID with captive portal and a ClearPass Guest Self Registration workflow when testing and launching the self-registration workflow, after successful registration, the login action shows the following error:
What is the best solution to resolve this error?
- A. You need to include the root and intermediate certificates in the captive portal certificate for your access points
- B. You need to change the Login Address in ClearPass to securelogin arubanetworKs.com
- C. You need to De connected to the guest SSiD while testing.
- D. You need to include the root and intermediate certificates in the captive portal certificate for your gateway
Answer: D
Explanation:
Including the root and intermediate certificates in the captive portal certificate for the gateway will resolve the error seen during the login action after successful registration. This is necessary to ensure the SSL/TLS handshake can be completed successfully, as the client browser needs to validate the entire certificate chain.
NEW QUESTION # 48
Refer to the CLI output below:
What statement about the output above is correct?
- A. The secondary tunnel endpoint IP is 10.10-10.151.
- B. The port-access role was configured with gateway-role visitor
- C. The client authenticated using dot1x.
- D. The UBT zone was configured to use a user-defined VRF
Answer: A
Explanation:
The CLI output indicates a tunnel creation process, where "SW hw tun created" refers to the switch hardware tunnel being created. The line mentioning "BYP-10.10.10.101 -> SW hw tun created to 10.10.10.151 tunnel
15." implies that a tunnel was established to the secondary tunnel endpoint with the IP address 10.10.10.151.
This is a common configuration for User-Based Tunneling (UBT) setups where traffic is tunneled to a specific endpoint.
NEW QUESTION # 49
You are troubleshooting a WLAN deployment with APs and gateways set up with an 802.1X tunneled SSIO.
End-users are complaining that they can't connect to die enterprise SSID. Which possible AP tunnel states could be the cause of the Issue? (Select two.)
- A. SM_STATE_CONNECTED
- B. SM_STATE_CONNECTING
- C. SM_STATE_RE KEYING
- D. SM_STATE_SURVIVED
- E. SM_STATE_SURVIVING
Answer: B,C
Explanation:
When troubleshooting a WLAN with 802.1X tunneled SSID issues, AP tunnel states indicate the status of the connection between the AP and the gateway/controller. The states 'SM_STATE_REKEYING' and
'SM_STATE_CONNECTING' could indicate transitional states where the connection has not been fully established, hence users might face issues connecting to the SSID. 'SM_STATE_REKEYING' implies that the AP is in the process of re-establishing encryption keys, while 'SM_STATE_CONNECTING' indicates that the AP is trying to establish a connection with the controller or gateway. These states could lead to temporary connectivity issues until the state transitions to 'SM_STATE_CONNECTED'.
NEW QUESTION # 50
An OSPF router has learned a pain 10 an external network by Doth an E1 and an E2 advertisement Both routes have the same path cost Which path will the router prefer?
- A. The router will use Doth paths equally utilizing ECMP.
- B. The router will prefer the E1 path.
- C. The router will prefer the E2 path.
- D. Both routes will be suppressed until the path conflict has been resolved.
Answer: B
Explanation:
In OSPF, when a router learns about an external network through both E1 and E2 advertisements, and if both have the same path cost, the router will prefer the E1 path. This is because E1 routes consider both the external cost to reach the external network and the internal cost to reach the ASBR, providing a more comprehensive metric. E2 routes only consider the external cost and ignore the internal cost to the ASBR, which could potentially lead to suboptimal routing. Therefore, the router will choose the E1 path due to its more accurate representation of the total path cost.
NEW QUESTION # 51
Match each Group Based Policy(GBP) rote description to its respective role ID.
Answer:
Explanation:
Explanation:
default GBP role =GBP role ID = 0infrastructure GBP role =GBP role ID = 2user-defined GBP role =GBP role ID = <100-8191>
NEW QUESTION # 52
Exhibit.
Which wireless connection phase has Just been completed?
- A. 802.11 enhanced open association
- B. L2 authentication and encryption
- C. MAC Authentication and 4-way handshake
- D. L3 authentication and encryption
Answer: B
Explanation:
The wireless connection phase that has just been completed is L2 authentication and encryption. This phase includes processes such as the Extensible Authentication Protocol (EAP) exchange, RADIUS requests and responses, and the 4-way handshake which is characteristic of WPA2-AES encryption.
NEW QUESTION # 53
You are deploying a new AOS 10 mobility gateway cluster. Due to customer requirements, the gateways must be configured with static IP addresses and are restricted from communicating using port 443 to any URLs except tor "central arubanetworks.com How would you onboard these gateways successfully into HPE Aruba Networking Central?
- A.
- B.
- C.
- D.
Answer: D
Explanation:
Option A includes all necessary steps for a full setup of an AOS 10 mobility gateway cluster, including setting the system name, switch role, ACP FQDN address, uplink port information, IP address and default gateway, DNS IP address, controller country code, timezone and clock, andadmin password. Since the gateways must have static IP addresses and can only communicate on port 443 for a specific URL, this configuration would need to allow for static IP configuration and restrict communication to the required URL.
NEW QUESTION # 54
An AOS 10 multi-site deployment has sites with AP-only bridged SSlDs and other sites with APs and gateways operating tunneled SSiDs. Client session state sync errors exist between secure lab environments and public -facing areas at several sites.
What is causing the issues?
- A. The DTLS connections are down between APs in the lab and APs in public areas
- B. The sites with issues are the AP-only deployments because the connection to HPE Aruba Networking Central is interrupted
- C. The sites with issues are the overlay AP with gateway sites because the connection to HPE Aruba Networking central is interrupted
- D. The affected clients are associated with an SSID with 11r and 11k disabled.
Answer: C
Explanation:
In a multi-site deployment with a mix of bridged and tunneled SSIDs, if there are session sync errors between different areas, it could be due to connectivity issues with the central management platform, which in the case of Aruba, is likely HPE Aruba Networking Central. This interruption could cause inconsistencies in session states across the network.
NEW QUESTION # 55
Based on best practices if an SSID is configured Tor a primary and secondary gateway cluster with cluster preemption enabled, which will decide if the APs move to the secondary gateway cluster if all of the nodes in the primary gateway cluster are down?
- A. cluster leader in the primary gateway cluster
- B. every AP individually
- C. cluster leader in the secondary gateway cluster
- D. tunnel orchestrator for LAN tunnel service in HPE Aruba Networking Central
Answer: B
Explanation:
In an Aruba network, if an SSID is configured for a primary and secondary gateway cluster with cluster preemption enabled, each AP individually will decide to move to the secondary gateway cluster if all of the nodes in the primary gateway cluster are down. This decentralized decision-making process enhances network resilience and ensures uninterrupted service for clients connected to the APs.
NEW QUESTION # 56
What is me recommended configuration to ensure link aggregation is consistent in a campus topology using VSX with two aggregation switches and downlinks to access switches?
- A. Keep the MTU values at the default setting for GRE and VXLAN communications
- B. Use the command "vsx-sync active-gateways" under the VSX context.
- C. Use a custom LACP hash algorithm for improved load Balancing.
- D. Use the command "vsx-sync mclag-interfaces" under the VSX context.
Answer: D
Explanation:
When configuring Virtual Switching Extension (VSX) in a campus topology for link aggregation across two aggregation switches, it is important to synchronize Multi-Chassis Link Aggregation Group (MC-LAG) interfaces. The command "vsx-sync mclag-interfaces" ensures that the state and configuration of MC-LAG interfaces are synchronized between the two VSX-linked switches,providing consistent link aggregation and preventing any loops or mismatched configurations that might occur if the interfaces were not in sync.
NEW QUESTION # 57
......
Dumps Real HP HPE7-A07 Exam Questions [Updated 2024]: https://www.preppdf.com/HP/HPE7-A07-prepaway-exam-dumps.html
Prepare HPE7-A07 Question Answers Free Update With 100% Exam Passing Guarantee [2024]: https://drive.google.com/open?id=1u_TfdxHfRTPpB3IziHeCN04KqlO9BRpd