Get Instant Access to 1z0-1075-24 Practice Exam Questions
Reliable Study Materials & Testing Engine for 1z0-1075-24 Exam Success!
NEW QUESTION # 20
Which three actions can a supervisor perform to annul or correct mistakes in a completed work order, committed by a user while entering work order details?
- A. Reverse a Closed order to Open.
- B. Reverse from Scrap to Ready.
- C. Reverse the product at the last operation.
- D. Reverse at an operation.
- E. Correct the Product entered at work order.
Answer: B,C,D
Explanation:
If a mistake is made in a completed work order, supervisors have the ability to perform certain corrective actions to reverse transactions or correct errors:
Reverse from Scrap to Ready (C): This action allows the supervisor to reverse a product that was incorrectly marked as scrap back to a ready state, making it available for further operations.
Reverse at an operation (D): If the mistake occurred during a specific operation, the supervisor can reverse the transaction at that operation and correct the mistake.
Reverse the product at the last operation (E): The supervisor can reverse a transaction at the last operation to make corrections to the final product before closing the work order.
Incorrect options:
A (Reverse a Closed order to Open): Once a work order is closed, it cannot be reopened. Reversing transactions must happen before the order is officially closed.
B (Correct the Product entered at work order): The product specified in a work order cannot be changed once the order has been processed and completed.
NEW QUESTION # 21
To help ensure compliance with the US Code of Federal Regulations (21 CFR Part 11), your client wants to enable audit trail for manufacturing work definitions and standard operations.
Which is NOT included in the audit trail for standard operations such as creation, update, and deletion?
- A. Operation resources. Including alternate resources
- B. Item structure component attributes referenced from Product Information Management(PIM)
- C. Descriptive flexfields (OFFs) at any level
- D. Work definition header and version attributes
- E. Attachments at any level
Answer: B
NEW QUESTION # 22
Which three entities must you set up in Oracle Manufacturing Cloud to create a work definition for an item that will be manufactured in-house?
- A. Operation items
- B. Manufacturing lead time
- C. Production line
- D. Operations
- E. Resources
Answer: A,D,E
Explanation:
To create a work definition for an in-house manufactured item in Oracle Manufacturing Cloud, the following entities must be set up:
Resources: Resources such as machines, labor, or tools are required to define what is needed to execute each operation.
Operations: These represent the steps in the manufacturing process. Each operation can have multiple resources and associated work instructions.
Operation Items: These are the items consumed or used during the operation. They include the components and materials needed for production.
While Production Line (C) and Manufacturing Lead Time (E) are important for scheduling and capacity planning, they are not mandatory for creating a basic work definition.
NEW QUESTION # 23
Two work definitions are created in the application: one for Engine Finished Good and the other for Pallet Finished Good. The Engine Finished Good item should have Pallet Finished Good as one of its components.
How can you establish the relationship between the Pallet and Engine work definitions?
- A. Assign a higher priority to the work definition created for Engine and a lower one to the work definition for Pallet.
- B. The two work definitions can be tied through Project or Selban numbers.
- C. Work definition versions can be used to tie the work orders.
- D. Create a subinventory to serve as the completion subinventory for yielding Pallet, and then use the same subinventory to serve as the supply subinventory of Pallet in the work definition created for Engine.
Answer: D
Explanation:
To establish a relationship between the work definitions of Engine Finished Good and Pallet Finished Good, you can create a common subinventory. This subinventory will serve as the completion subinventory for the Pallet Finished Good and the supply subinventory for the Engine Finished Good. This ensures that the Pallet Finished Good is completed in one process and is then available as a component for the Engine Finished Good.
Subinventory Linking: Using a common subinventory ties the output from one work definition as an input to another. The Pallet becomes an inventory item that is consumed in the production of the Engine.
NEW QUESTION # 24
Your customer runs production 24 x 7 x 365 and wants to track Overall Equipment Effectiveness (OEE) online.
Which key setup can they use to achieve this?
- A. Enable IoT Asset Monitoring and turn on "Enable synchronization to IoT Asset Monitoring" in Resources.
- B. Enable IoT Asset Monitoring and turn on "Enable synchronization to IoT Asset Monitoring" In Plant Parameters.
- C. Enable IoT Production Monitoring and turn on "Enable synchronization to IoT Production
- D. Enable IoT Production Monitoring and turn on "Enable synchronization to IoT Production Monitoring" In Inventory Organization.
- E. Enable IoT Fleet Monitoring and enable synchronization to IoT Production Monitoring in Plant Parameters.
Answer: D
Explanation:
To track Overall Equipment Effectiveness (OEE) in real-time, Oracle Manufacturing Cloud can integrate with IoT solutions. The correct setup involves:
Enabling IoT Production Monitoring and turning on synchronization to IoT Production Monitoring in the Inventory Organization. This allows real-time data from the shop floor to be captured, processed, and used to monitor equipment effectiveness, performance, and availability.
Incorrect options:
IoT Fleet Monitoring (A) and IoT Asset Monitoring (B, D) focus on tracking assets and fleets, which are more relevant for logistics or asset management, not production monitoring for OEE.
NEW QUESTION # 25
Which statement is NOT true about cumulative lead time?
- A. It updates lead time percent at the operation level in the work definition.
- B. It calculates cumulative total lead times by rolling up lead times of make items and adding up lead time values of buy items.
- C. It updates the item's lead time attributes at the end of the calculation process: cumulative manufacturing and cumulative total lead times.
- D. It calculates cumulative manufacturing lead times by rolling up manufacturing lead times of make Items.
Answer: A
NEW QUESTION # 26
In which two places can you create and edit user-defined work order statuses?
- A. Scheduled Processes
- B. Work Definition work area tasks
- C. Work Execution work area tasks
- D. Functional Setup Manager > Setup: Manufacturing and Supply Chain Materials Management
Answer: C,D
Explanation:
User-defined work order statuses can be created and edited in the following areas of Oracle Manufacturing Cloud:
Functional Setup Manager: This is where the configuration of user-defined work order statuses is performed under the "Manufacturing and Supply Chain Materials Management" setup. Users can define new statuses and configure their behavior.
Work Execution work area tasks: Users can also manage work order statuses directly in the Work Execution area, which is part of the day-to-day management of production orders.
Incorrect options:
Scheduled Processes (A) and Work Definition work area tasks (B) are not areas where work order statuses are defined or edited.
NEW QUESTION # 27
Production operations need operators to execute the right steps to produce quality products, so want to use "View Document Items on a Dispatch List." Which statement is NOT true?
- A. You cannot view the document item attachment on the Manage Supplier Operations page.
- B. You can view the document item attachment in the dispatch list and on the Manage Supplier Operations page by using the attachment icon.
- C. You will always see the active revision of the attachment from currently effective revision of the document from Master Organization.
- D. You can add attachments to the document item and invoke the engineering change order to release the latest revision of the document item and attachment.
Answer: C
Explanation:
When using the "View Document Items on a Dispatch List" functionality, production operators can view and access necessary document attachments to ensure correct steps in the manufacturing process. The statement that is not true is:
Statement B is incorrect because you do not always see the active revision of the attachment from the currently effective revision in the Master Organization. The revision displayed in the dispatch list may depend on the specific version that was assigned to the work order or operation at the time of creation, not necessarily the most current revision in the Master Organization.
Correct statements:
Statement A: Document attachments cannot be viewed on the Manage Supplier Operations page.
Statement C: Attachments can be added to document items, and updates can be managed through engineering change orders.
Statement D: Document item attachments are viewable both in the dispatch list and on the Manage Supplier Operations page via the attachment icon.
NEW QUESTION # 28
Which statement is NOT true about cumulative lead time?
- A. It updates lead time percent at the operation level in the work definition.
- B. It calculates cumulative total lead times by rolling up lead times of make items and adding up lead time values of buy items.
- C. It updates the item's lead time attributes at the end of the calculation process: cumulative manufacturing and cumulative total lead times.
- D. It calculates cumulative manufacturing lead times by rolling up manufacturing lead times of make Items.
Answer: A
Explanation:
Cumulative lead time is a key concept in Oracle Manufacturing Cloud, where it calculates the total time required to manufacture an item. The following points clarify the calculations:
Statement D is incorrect because cumulative lead time does not update the lead time percent at the operation level in the work definition. Instead, cumulative lead time focuses on rolling up the lead times of both make and buy items to provide an overall lead time for the entire production process.
Correct Statements:
Statement A: The system calculates cumulative manufacturing lead time by summing up the lead times of all make items in the production process.
Statement B: At the end of the cumulative lead time calculation process, it updates the lead time attributes of the item, specifically cumulative manufacturing and cumulative total lead times.
Statement C: Cumulative total lead time includes both make and buy item lead times, representing the complete production cycle from procurement to manufacturing.
NEW QUESTION # 29
A Production Operator is executing a work order at your plant. After completing move transactions, they notice that they have performed some incorrect move operations, including incorrect scrap and reject transactions.
They must perform a reverse transaction to correct the errors. The operations are not count point-enabled and not auto-charged.
Which four transactions are required to correct this situation?
- A. Reverse material issued to a work order.
- B. Reverse from Scrap to Ready.
- C. Reverse resources charged to a work order.
- D. Reverse the product at the last operation.
- E. Reverse at an operation.
- F. Reverse from Reject to Ready.
Answer: A,B,E,F
Explanation:
When correcting incorrect move operations such as scrap and reject transactions, and the operations are not count point-enabled and not auto-charged, multiple reverse transactions are required:
Reverse material issued to a work order: This is required to correct any incorrect material that was issued to the work order initially.
Reverse at an operation: This transaction allows the production operator to reverse an incorrect operation move to return the product to the previous step.
Reverse from Scrap to Ready: If the operator incorrectly marked an item as scrap, this transaction moves it back to a ready state for further processing.
Reverse from Reject to Ready: This transaction is used to reverse any items incorrectly marked as rejected back to a ready status.
Incorrect options:
Reverse the product at the last operation (E) and Reverse resources charged to a work order (F) are not necessary since the operations are not count point-enabled and not auto-charged.
NEW QUESTION # 30
Which statement is NOT true about using a Quick Complete action for an operation transaction?
- A. You can use it to transact only one serial number at a time.
- B. You can use it to collect Inspection results.
- C. You can use it for simultaneous reporting of one or more transactions.
- D. It is used on serial tracked operations and non-serial tracked operations with or without inspections.
- E. You can use It to transact one or more serial numbers.
Answer: A
Explanation:
The Quick Complete action allows for fast, simplified transaction processing for work orders and operations. The statement that is not true is:
Statement E is incorrect because Quick Complete can be used to transact multiple serial numbers at a time, not just one. This feature is designed to handle both serial-tracked and non-serial-tracked operations efficiently.
Correct statements:
Statement A: Quick Complete supports simultaneous reporting of multiple transactions, allowing for streamlined processing.
Statement B: It can be used for both serial-tracked and non-serial-tracked operations, whether or not inspections are involved.
Statement C: Multiple serial numbers can be transacted at once using this feature.
Statement D: While Quick Complete can handle inspection-related transactions, it is not specifically for collecting inspection results.
NEW QUESTION # 31
To help ensure compliance with the US Code of Federal Regulations (21 CFR Part 11), your client wants to enable audit trail for manufacturing work definitions and standard operations.
Which is NOT included in the audit trail for standard operations such as creation, update, and deletion?
- A. Operation resources. Including alternate resources
- B. Item structure component attributes referenced from Product Information Management(PIM)
- C. Descriptive flexfields (OFFs) at any level
- D. Work definition header and version attributes
- E. Attachments at any level
Answer: B
Explanation:
When enabling audit trail functionality to ensure compliance with the US Code of Federal Regulations (21 CFR Part 11), certain actions related to work definitions and standard operations are audited for changes such as creation, update, and deletion. However, not all aspects are tracked in the audit trail.
Item structure component attributes referenced from Product Information Management (PIM) are not included in the audit trail. PIM attributes are managed separately from manufacturing-specific data, and changes to these components are not captured in the standard operations audit trail.
Audited components typically include:
Work definition header and version attributes
Descriptive flexfields (DFFs) at any level
Attachments at any level
Operation resources, including alternate resources
NEW QUESTION # 32
A Manufacturing Engineer in a plant is creating an alternate manufacturing process for an item using its existing work definitions. After copying from the existing work definition, WD1, to the alternate work definition, WD2, the engineer finds that the operation items were not copied in the alternate manufacturing process WD2.
What is the reason for this?
- A. Production Priority was not populated in the new WD2 during creation.
- B. Item and Structure Name in the existing WD1 were retained in the new WD2 during creation.
- C. Item and Structure Name were changed in the new WD2 during creation.
- D. Start Date was not populated in the new WD2 during creation.
Answer: C
Explanation:
When creating an alternate work definition (WD2) by copying from an existing one (WD1), if the Item and Structure Name were changed during the creation of WD2, the operation items would not be copied. This is because operation items are tied to specific item structures. Changing the structure results in a disconnect between the original operation items and the new work definition.
Item and Structure Name are critical in ensuring that the operation items (components and materials) are transferred when copying work definitions. If these names are changed, the system does not assume the same items should be used.
NEW QUESTION # 33
Which statement is NOT true about the Reservations tab?
- A. A work order can be reserved against one or more sales orders.
- B. Demand details displayed are: Document Type (such as Sales Order), Customer Number and Name, Document Number, Due Date, and Quantity.
- C. Reservations are generally created when a Back-to-Back sales order or a Configured Items sales order Is reserved for the work order.
- D. Manual reservations can be done for a work order in inventory.
- E. You can view the reservation details of a work order as a source of demand, and a sales order as supply.
Answer: E
Explanation:
In Oracle Manufacturing Cloud, the Reservations tab provides detailed information on reservations linked to work orders and sales orders. The following explains why statement E is not true:
Statement E is incorrect: A work order is typically viewed as a source of supply, not demand. Sales orders generate demand, while work orders are created to supply the required products. Therefore, reservation details will show the work order as a source of supply and the sales order as the source of demand.
Correct statements:
Statement A: Demand details such as document type (e.g., Sales Order), customer number, document number, due date, and quantity are displayed.
Statement B: Reservations are often created for Back-to-Back or Configured Items sales orders to ensure the necessary products are reserved in the system for production.
Statement C: A work order can be reserved against one or more sales orders, especially in cases of configurable or customized items.
Statement D: Manual reservations for a work order can be made directly in inventory to allocate the necessary materials for production.
NEW QUESTION # 34
A Plant Manager bought several machines for their ABC manufacturing plant. The plant is set up with a separate cost element set, ABC, in Manufacturing Cloud.
How must the Plant Manager configure these machines so that they are costed to the work order for which operations are performed on them?
- A. Set up the machines with a cost element type of "Overhead" by selecting Cost Element Set Common.
- B. Set up the machines with a cost element type of "Resource" by selecting Cost Element Set ABC.
- C. Set up the machines with a cost element type of "Overhead" by selecting Cost Element Set ABC.
- D. Set up the machines with a cost element type of "Resource" by selecting Cost Element Set Common.
Answer: B
Explanation:
When configuring machines that will be used in production operations and will incur costs associated with work orders, the correct setup for these machines involves:
Setting up the machines as a "Resource" in the cost element set ABC: This allows the machines to be directly associated with the work orders for which they are used, ensuring that their costs are appropriately tracked and charged to the work order. Resources include equipment, labor, and other direct costs involved in production.
Incorrect options:
"Overhead" (B, D): Overhead costs typically represent indirect costs, not the direct usage of machines in production.
Cost Element Set Common (A): Since the plant uses a separate cost element set (ABC), the machines must be assigned to this specific set, not the Common cost element set.
NEW QUESTION # 35
An employee is responsible for dealing with different manufacturing practices and processes, machines, tools, and equipment that turn raw material into a product.
Which seeded job role must you assign to this employee?
- A. Production Engineer
- B. Manufacturing Engineer
- C. Manufacturing Supervisor
- D. Production Operator
- E. Production Supervisor
Answer: B
Explanation:
In Oracle Manufacturing Cloud, the Manufacturing Engineer role is responsible for dealing with various manufacturing practices, processes, machines, tools, and equipment that transform raw materials into finished products. This role focuses on defining and managing production processes, resources, and operations in manufacturing plants.
Manufacturing Engineer: This role involves creating and maintaining manufacturing processes, production resources, and work instructions. It ensures that products are manufactured efficiently and in compliance with quality standards.
NEW QUESTION # 36
In a Manufacturing Cloud implementation, users are finding it difficult to track information about work orders executed across various work centers.
Which three information types in the Work Order Traveler can help users in this situation?
- A. Work definition details
- B. Product serial Information
- C. Hard pegging of items
- D. Reservation against sales orders
- E. Item on-hand quantity
Answer: A,B,D
Explanation:
The Work Order Traveler in Oracle Manufacturing Cloud provides detailed information about work orders to help users track and manage work orders across various work centers. The following types of information are especially useful:
Work definition details (D): This provides detailed information about the operations and resources required to complete the work order, helping users understand the manufacturing process and requirements.
Product serial information (E): Tracking serial numbers for products is critical, especially in industries where traceability and product lifecycle management are important.
Reservation against sales orders (A): This information links work orders to specific sales orders, providing clarity on how the work order aligns with customer demand.
Incorrect options:
Hard pegging of items (B) and Item on-hand quantity (C) are not typically tracked through the Work Order Traveler report, as this report focuses more on the work order's execution rather than inventory management.
NEW QUESTION # 37
Your customer has multiple distribution centers and a few manufacturing plants. The plants manufacture different items with some overlap between them. The distribution centers stock parts from all plants.
A Corporate Engineering team is responsible for centrally defining items and catalogs. This team defines the items and sets the attributes for most parameters. The respective distribution centers and manufacturing plants must be allowed to change some attributes locally.
What is the best way to achieve this?
- A. Set up plants and the Corporate Engineering organization as item organizations, and distribution centers as inventory organizations.
- B. Set up plants and the Corporate Engineering organization as Inventory organizations, and distribution centers as item organizations.
- C. Set up plants as inventory organizations, and distribution centers and the corporate Engineering organization as item organizations.
- D. Set up plants and distribution centers as inventory organizations, and the Corporate Engineering organization as an Item organization.
- E. Set up plants, distribution centers, and the Corporate Engineering organization as inventory organizations.
Answer: D
Explanation:
In Oracle Cloud, managing items and their attributes across multiple organizations requires careful structuring of inventory and item organizations. The best way to configure this setup given the customer's requirements is as follows:
Plants and Distribution Centers as Inventory Organizations: Inventory organizations are required to manage on-hand quantities, perform transactions, and handle the physical movement of materials. Plants need to be inventory organizations to manage production, and distribution centers need to be inventory organizations to manage stocking and distribution.
Corporate Engineering Organization as an Item Organization: An item organization is responsible for centrally defining item attributes. By setting the Corporate Engineering team as an item organization, you ensure that item definitions are controlled centrally. The team can define standard attributes while allowing inventory organizations (plants and distribution centers) to modify certain attributes at their level based on local needs.
This structure allows for centralized item management with localized flexibility for plants and distribution centers.
Reference:
Incorrect Options:
A: Defining all entities as inventory organizations would not allow centralized control of item attributes.
C, D, E: These setups would either limit the ability to control item attributes centrally or misassign organizations that need to handle physical inventory as item-only organizations.
NEW QUESTION # 38
Which three requirements are fulfilled by nonstandard work orders?
- A. Prototype
- B. Repair
- C. Rescheduling
- D. Rework
Answer: A,B,D
Explanation:
Nonstandard work orders in Oracle Manufacturing Cloud are used for specialized tasks that do not follow typical production processes. The following are the main requirements fulfilled by nonstandard work orders:
Repair: Nonstandard work orders can be used for maintenance and repair tasks to fix or refurbish defective or damaged items.
Rework: These work orders are also used for rework processes, where a product needs to be reprocessed to meet quality standards or specifications.
Prototype: Nonstandard work orders can handle prototype production, where items are produced in small quantities for testing and development before mass production.
Rescheduling (A) is typically handled by standard work orders in the production schedule rather than through nonstandard work orders.
NEW QUESTION # 39
......
Validate your Skills with Updated 1z0-1075-24 Exam Questions & Answers and Test Engine: https://www.preppdf.com/Oracle/1z0-1075-24-prepaway-exam-dumps.html
Tested & Approved 1z0-1075-24 Study Materials Download: https://drive.google.com/open?id=1u7EZlESeIZLwAa2CVsKDYnzrwH2qtR2b