[Nov-2021] Updated CCNP Data Center 300-625 Exam Questions BUNDLE PACK
Master The Cisco Content 300-625 EXAM DUMPS WITH GUARANTEED SUCCESS!
The Cisco 300-625 exam checks the applicants’ understanding and skills in working with MDS 9000 Series switches from Cisco. The test deals with the deployment, implementation, management, monitoring, and troubleshooting of these switches. This is one of five concentration exams for earning the CCNP Data Center certification. If you pass it apart from the core test, which is known as Cisco 350-601, you will only obtain the specialist-level certificate.
NEW QUESTION 42
After user account attributes are modified in Cisco NX-OS, when do changes to the user's session attributes take effect?
- A. when the user creates a new session
- B. when the user logs out of a session
- C. immediately
- D. at the scheduled time
Answer: A
NEW QUESTION 43
A Cisco MDS Series Switch with the POAP feature boots and does not find the startup configuration Which location is checked first when the switch enters POAP mode?
- A. USB device that contains the software image files and the switch configuration file
- B. DHCP server to bootstrap the interface IP address, gateway, DNS server, and TFTP IP addresses
- C. TFTP server where the necessary configuration files are downloaded
- D. HTTP server where the URL is used to download the software image
Answer: B
NEW QUESTION 44
Drag and Drop Question
Drag and drop the FLOGI parameters from the left onto the descriptions from which they were- derived on the right.
Answer:
Explanation:
NEW QUESTION 45
A storage administrator is upgrading Cisco NX-OS on a Cisco MDS switch. The administrator performs an ISSU upgrade following the configuration guide. While the install is proceeding, the administrator connects a new server to the switch, which cannot access storage. The existing servers continue to operate property through the switch. Why is the new server failing to connect?
- A. The zoning database is locked during the upgrade process
- B. The fabric data plane resets as part of the upgrade process
- C. The upgrade process disables any currently unused ports
- D. The new server is unable to log in to the fabric to receive an FC-ID
Answer: C
NEW QUESTION 46
After a subordinate switch requests a domain ID form a principal switch, the requested domain ID becomes the runtime domain ID, and all interfaces on the affected VSAN are isolated. What is a solution to the issue?
- A. Configure IVR NAT on the affected VSAN.
- B. Enable the FICON feature on the affected VSAN.
- C. Configure a static domain on the subordinate switch and reboot the switch.
- D. Add the received ID to the allowed list.
Answer: D
NEW QUESTION 47
Which configuration is needed to enable manual ESP mode for Fibre Channel TrustSec on Cisco MDS switches?
- A. MDS(config)# fcsp esp manual
- B. MDS(config)# interface fc 1/1
MDS(config-if)# fcsp esp manual - C. MDS(config)# interface fc 1/1
MDS(config-if)# fcsp esp manual
MDS(config-if-esp)# mode gem - D. MDS(config)# interface fc 1/1
MDS(config-if)# fcsp mode gem
MDS(config-if-fcsp)# fcsp esp manual
Answer: C
NEW QUESTION 48
Refer to the exhibit.
Refer to the exhibit. What is the result of the configuration?
- A. No-drop CoS values are advertised by the DCBX.
- B. PFC fails to operate properly unless LFC is disabled on Ethernet 1/10.
- C. PFC operates on Ethernet 1/10 regardless of the capability of the peer.
- D. LFC is prioritized over PFC on Ethernet 1/10.
Answer: A
NEW QUESTION 49
Refer to the exhibit.
An engineer is configuring Inter-VSAN routing for two Cisco MDS switches. The FSPF cost between the switches is 500, and the Cisco MDS core virtualizes an IVR NAT domain as shown. Which statement about the topology is correct?
- A. The MDS-Core simulates an IVR NAT, and the FSPF cost is 500.
- B. The MDS-Core simulates an IVR NAT, and decreases the cost to 400.
- C. The MDS-Core simulates an IVR NAT, and increases the cost to 501.
- D. The MDS-Core simulates an IVR NAT, and increases the cost to 600.
Answer: C
Explanation:
Section: Implementation
NEW QUESTION 50
Refer to the exhibits.
A storage network engineer activates a zoneset on MDS-A and verifies the successful activation (Exhibit 1).
The engineer is then notified that there is a SAN outage (Exhibit 2) What is the cause of the outage?
- A. Another network engineer issued the zone default-zone permit vsan 100 command on another switch in the fabric.
- B. Another network engineer issued the zone mode enhanced vsan 100 command on another switch in the fabric.
- C. Another network engineer activated zoneset ZoneSetMDS-B-VSAN100 on MDS-A.
- D. Another network engineer activated the zoneset ZoneSetMDS-B-VSAN100 command on another switch in the fabric.
Answer: A
Explanation:
Section: MDS Troubleshooting
NEW QUESTION 51
Which two components are required for successful MDS USB POAP (Choose two.)
- A. system and kickstart images
- B. script named poap_script pl
- C. NTFS formatted USB drive
- D. USB drive in port 1
- E. ENTERPRISE_PKG license
Answer: A,B
Explanation:
Section: Deployment
NEW QUESTION 52
Refer to the exhibit. The san-user must configure FSPF on the VSAN 500, but fails. An operator with network administrative rights must authorize the san-user to perform this work.
Which configuration must the operator apply?
- A. MDS-A(config)# role name sangroup
MDS-A(config-role)# rule 4 permit config feature fspf - B. MDS-A(config)# role name sangroup
MDS-A(config-role)# rule 2 permit config feature vsan - C. MDS-A(config)# role name sangroup
MDS-A(config-role)# no rule 2 - D. MDS-A(config)# role name sangroup
MDS-A(config-role)# vsan policy deny
MDS-A(config-role-vsan)# permit vsan 500
Answer: D
NEW QUESTION 53
A storage administrator manually configures a storage switch to use a new static domain ID. After issuing an fcdomain restart vsan 1 command, the administrator sees that the switch is still using the existing domain ID. What is the reason why the configuration is not working?
- A. Build fabric notifications were not sent to the other switches.
- B. Domain manager fast restart is not enabled on the switch.
- C. Static domain IDs apply only after a switch is rebooted.
- D. The disruptive keyword was not used on the command.
Answer: C
NEW QUESTION 54
Refer to the exhibit.
A network engineer created a new user that uses the VSAN-Admin role on a Cisco MDS switch so a new colleague can manage the VSANs configured on the switch. Which action is required for the configuration to give permission to the new colleague?
- A. permit vsan 1-1000 must be configured as rule 1.
- B. permit vsan 1-1000 must be configured under the VSAN policy deny.
- C. permit vsan 1-1000 must be configured under the VSAN policy allow.
- D. permit vsan 1-1000 must be configured as rule 5.
Answer: B
NEW QUESTION 55
Refer to the exhibit.
Refer to the exhibit. A port channel has been configured between a Cisco MDS and a Cisco Fabric Interconnect switch. Which interface(s) in the port channel carry the control plane traffic?
- A. from interface fc1/10
- B. from interface fc1/9
- C. per packet, balanced between interfaces fc1/9 and fc1/10
- D. per flow, balanced between interfaces fc1/9 and fc1/10
Answer: C
NEW QUESTION 56
A storage network engineer is implementing disk-array data replication between two SAN environments in two different data centers not connected via Fibre Channel. Which SAN switch feature must be implemented?
- A. IVR
- B. VSAN scoping
- C. zoning merge over LAN
- D. FCIP
Answer: D
NEW QUESTION 57
Drag and drop the mechanisms of Cisco Secure Boot from the left into the correct order on the right.
Answer:
Explanation:
NEW QUESTION 58
Which statement accurately describes the result of disabling restrictions on oversubscription ratios on Cisco MDS 9000 Series Fibre Channel switching modules?
- A. QoS can be configured.
- B. The bandwidth allocated to shared ports is proportionate to the configured speed of the ports.
- C. The bandwidth allocation of the shared ports is equal to the lowest configured bandwidth.
- D. A port-group can contain a single port only.
Answer: B
NEW QUESTION 59
An engineer is configuring a SAN environment and attempts to activate a zoneset, but a lock is held by another user. Which argument does the engineer use to clear the lock from the zoning database configuration?
- A. abort
- B. force
- C. commit
- D. clear
Answer: D
Explanation:
Section: Implementation
NEW QUESTION 60
Which two components are required for successful MDS USB POAP (Choose two.)
- A. system and kickstart images
- B. script named poap_script pl
- C. NTFS formatted USB drive
- D. USB drive in port 1
- E. ENTERPRISE_PKG license
Answer: A,B
NEW QUESTION 61
Refer to the exhibit.
Refer to the exhibit. Which command is used to determine which switch has the lock?
- A. show zoneset active
- B. show zont status
- C. show flogi database
- D. show fcs ie vsan
Answer: B
NEW QUESTION 62
What is the function of the 0xFFFFFC address in a Fibre Channel fabric?
- A. fabric controller
- B. time server
- C. name server
- D. management server
Answer: C
Explanation:
Section: Implementation
Explanation
NEW QUESTION 63
Which command identifies the application and the user that have a Cisco Fabric Services session open?
- A. show device-alias database
- B. show cfs lock
- C. show zoneset active
- D. show cfs application
Answer: A
NEW QUESTION 64
......
Requirements to Fulfill
Cisco 300-625 is specifically designed to assert the skills and understanding essential for working with the ever-evolving data center technologies. To get accredited, the candidates should gain the passing score in one required core exam and one of 5 concentration tests at choice. If you want to get the professional-level certificate, it is recommended to have at least 3-5 years of hands-on experience in working with implementing data center solutions along with routing and switching. It is not a strict requirement, but this level of expertise will certainly help you deal with both the qualifying exams.
Associated Certification Profile
Cisco 300-625 or DCSAN 300-625 exam is focused on the candidates’ skills in the implementation of Cisco storage area networking and is associated with 2 certifications. First, passing it alone will allow an individual to claim Cisco Certified Specialist – Data Center SAN Implementation certificate. This is an intermediate-level step at the accreditation path that explains the nitty-gritty of SAN implementation within a given data center environment.
When clubbed with 350-601 DCCOR exam, Cisco 300-625 will help to acquire the CCNP Data Center certification. In this case, it acts as a choice of several concentration tests.
CCNP Data Center is a certificate known to verify one’s sound understanding essential for handling data center operations. Earning it will place a candidate at the core of Cisco data center and enjoy an impressive career.
Pass Cisco 300-625 Exam – Experts Are Here To Help You: https://www.preppdf.com/Cisco/300-625-prepaway-exam-dumps.html