Pass Your Exam Easily! HPE6-A80 Real Question Answers Updated on Aug 15, 2022 [Q30-Q49]

Share

Pass Your Exam Easily! HPE6-A80 Real Question Answers Updated on Aug 15, 2022

Actual Questions Answers Pass With Real HPE6-A80 Exam Dumps

NEW QUESTION 30
Refer to the exhibit.

This warehouse has the dimensions shown in the exhibit. The warehouse is 20 feet (6 m) high up to a steel railing on the celling. The shelves are about 16 feet (5m) high, and they hold large containers filled with fluid and metal equipment.
The customer needs consistent wireless coverage throughout the warehouse, mostly to support the tablets that employees use to run Inventory tracking and other applications. The warehouse staff works in shifts of 20.
The architect has selected AP-515S. About how many APs should the architect propose?

  • A. about 6-8
  • B. about 13-16
  • C. about 23-32
  • D. about 6-4

Answer: A

 

NEW QUESTION 31
An indoor basKetbaiI stadium has 5.000 seats in two rings:
* The stadium has a ceiling height of GO feet (18 m).
* There is a catwalk around the perimeter of the basketball court, between the court and the seating areas.
* This catwalk is 40 feet (12 m) from the floor.
* There are two scoreboards at either end of the stadium.
* The construction of the stadium is concrete and sleet.
The customer does not want an under-seat, picoceli deployment.
Which AP model is appropriate to provide coverage in the main stadium bawl?

  • A. AP-575
  • B. AP-577
  • C. AP-555
  • D. AP-505

Answer: B

 

NEW QUESTION 32
Refer to the exhibit.

The exhibit shows the design for an existing network. The customer intends to replace the current Core switches with two Aruba 8400 switches.
What are two points that the architect should ensure that the customer understands? (Select two.)

  • A. The 8400 switches run different software than the 5400R switches.
  • B. The 8400 switches have a smaller ARP table than the 540OR switches.
  • C. The 8400 switches cannot be monitored by AirWave.
  • D. The 8400 switches do not support VSF.
  • E. The 8400 switches are fixed port switches.

Answer: A,B

 

NEW QUESTION 33
What is one reason to deploy an Aruba CX switch when compared to an ArubaOS switch?

  • A. to support Zero Touch provisioning (ZTP)
  • B. to support Aruba Dynamic Segmentation
  • C. to obtain API-enabled programmability for greater automation
  • D. to obtain higher wattage power modules for enhanced PoE+ support

Answer: D

 

NEW QUESTION 34
in which scenario do Aruba CX 6400 Series switches, but not Aruba 6300M Series switches, meet the needs Tor a wired upgrade?

  • A. The customer requires enhanced redundancy at the access layer and wants to ensure that each switch can continue to operate even if a power supply fails
  • B. The customer has recently deployed Aruba AP-535 APs and is concerned about a future-proof wired edge that will continue to support expanding bandwidth requirements.
  • C. The customer requires switches in the same closet to operate together as a single switch for Link Aggregation but to be managed as separate devices.
  • D. The customer requires each access layer switch to support at least 25Gbps on its fiber uplinks at all times; including if up to one uplink tails.

Answer: C

 

NEW QUESTION 35
An archinect needs lo plan a Mobility Master (MM) solution for a customer Requirements include:
* redundancy for the MM
* redundancy for the MCS (seamless failover if up to one fails)
The wireless network consists of
* total APs - 300
* total wireless devices = 20,000
* total MCs = 10
The customer wants the most cost-effective plan that meets me requirements.
Which plan for MMs should the architect select?

  • A. 2 MM-HW-1QK
  • B. 2 MM-HW-5K
  • C. 1 MM-HW-5K and 1 MM-HW-1K
  • D. 1 MM-HW-5K and 1 MM-VA-1K

Answer: A

 

NEW QUESTION 36
Refer to the exhibit.

The exhibit shows the topology for a new Aruba solution. The MCs are in a ctuster and support all of the wireless traffic in the network The core switches route all traffic and support all VLANS. The access fayer switches do NOT use tunneiednode. or dynamic segmentation.
The customer has indicated that it has these VLANS for user devices.
* VLAN 11 for Floori employee wired devices
* VLAN 12 for Floor 2 employee wired devices
* VLAN 13 tor Floor 3 employee wired devices
* VLAN 14 for Floor 4 employee wired devices
* VLAN 15 for Floor 5 employee wired devices
* VLAN 101 for all employee wireless devices
* VLAN 102 for all guest wireless devices
In which locations should the architect plan the VLANs?

  • A. VLANs 11-15 on one MC. VLANs 101 and 102 on the other MC. (Other VLANs will be used on the access layer switches.)
  • B. VLANs 11-15. 101. and 102 on both MCs. (Other VLANs will be used on the access layer switches.)
  • C. VLANs 11-15 on the access layer switches on the corresponding floor; VLAN 101 on one MC and VLAN 102 on me other MC
  • D. VLANS 11-15 on the access layer switches on the corresponding floor; VLANS 101 and 102 on both MCS.

Answer: C

 

NEW QUESTION 37
A customer has a large network, which includes a main site and many branch sites. The network has a total of about 10.000 wireless devices at the main site and 15,000 wireless devices total at branches.
To fulfill the requirements for a wireless network upgrade, the architect plans to propose;
* 2 7205 MCs at the main site
* 2 7210 MCs at the main site
* 10 7030 MCs at branch sites
* 200 RAPs at branch sites
* 500 CAPS at the main site
* 300 CAPS at branch sites
What is the most cost-effective Mobility Master solution that meets the requirements'?

  • A. MM-HW-5K appliance + MM-HW-5k appliance
  • B. MM-HW-1K appliance
  • C. MM-HW-5K appliance
  • D. MM-HW-1OK appliance

Answer: A

 

NEW QUESTION 38
A hospital needs a Getter way to track its inventory Including wireless medical devices that are moved around the site a lot.
Which solution meets these needs?

  • A. Aruba asset tags and beacons
  • B. Aruba asset tags, APs; and Meridian
  • C. Aruba beacons. APs. and AirWave
  • D. Aruba beacons and Meridian

Answer: D

 

NEW QUESTION 39
A retailer wants to add a wireless network to its stores to provide guest access. The store has wired POS systems which the customer will now replace with wireless systems.
What is one Important security action that the wireless solution supports to comply with PCI DSS?

  • A. Use test-practice, factory default settings for security settings and login credentials.
  • B. Impose mandatory clean up periods to delete records of user access to controllers
  • C. Enforce role-based access control on administrators who access controllers
  • D. Implement TKIP encryption on the wireless network used by POS devices.

Answer: A

 

NEW QUESTION 40
A customer has multiple medium and large branch sites, eacri of which requires between S ana 16 APs and supports between 200 and 600 wireless clients, Every branch site has an Internet connection, which it uses to reach the central data center. The customer would prefer the WAN links to be optimized in the solution.
Different use cases require SSID's for tunneled traffic from remote sites to central location, traffic that must remain local on the remote site, and traffic which would need to egress out from remote site Internet connection.
Which branch office solution best meets the customer needs?

  • A. CAPS and branch office controllers
  • B. RAPs and branch office controllers
  • C. lAPs with Aruba central
  • D. IAPs with branch office controllers

Answer: C

 

NEW QUESTION 41
Refer to the exhibit.
A customer has an existing network with ArubaOS switches, Aruba 7205 controller, and 802.11ac APs. The customer needs a wired upgrade for their campus network and wireless upgrade with 802,11ax APs and would like to get all the functions of AP.
The customer has one building with 3 floors with the following wired devices,
* 200 VOIP phones
* 8 printers
* security cameras
The architect plans to propose 75 AP-535s.
The security cameras are a high definition pan-tilt-zoom with heaters for harsh environments that require more than 45 W to function, Which exhibit shows an access switch mat meets the customer needs?
A)

B)

C)

D)

  • A. Option D
  • B. Option C
  • C. Option B
  • D. Option A

Answer: A

 

NEW QUESTION 42
Which scenario Indicates the need for a wireless mesh?

  • A. A company needs to provide seamless roaming and wireless access between two buildings. The buildings are about 60 feet (18 m) apart.
  • B. A company has a small branch office with just one RAP. The company has noticed that performance is poor in some areas of the network and wants to add another AP.
  • C. A nsstorical building has some wired areas and a few areas with no wired or wireless connectivity, walls and ceilings have asbestos. The company needs wireless access across the site.
  • D. A hospital needs to provide high availability for wireless services in certain areas which support very critical wireless medical devices. Devices must always be in range of at least two APs.

Answer: A

 

NEW QUESTION 43
A customer has an existing; Aruba wireless solution to provide wireless access for employees. The solution Includes Aps, mobility controllers (MCs) at the network core, and a Mobility Master (MM} A customer would like to set up a separatelymanaged guest network and have the traffic go directly to the DMZ.
What should the architect suggest as the simplest solution that meets the requirements?

  • A. Use MulitZone, and put a mobility controller in Itie DMZ.
  • B. Add APs in a dedicated AP group to support only the guest network SSID.
  • C. Double the number of APs and controllers.
  • D. Have a dedicated mobility controller in the DMZ managed by the same MM

Answer: A

 

NEW QUESTION 44
Refer to exhibit.

A customer has a building that needs a switch upgrade. The customer would like at least 20Gbps for the uplink bandwidth out of each closet. The building wiring plan is shown in Exhibit i. The customer will not consider any cabling upgrades at this point. The current proposal is shown in Exhibit 2.
Which correction must the architect make to the proposal to meet the customer requirements?

  • A. Add an aggregation layer, and connect wiring closet switches to the aggregation layer with SFP+- SR transceivers
  • B. Add an aggregation layer, and connect wiring closet switches to the aggregation layer on Smart Rate pons.
  • C. Add a mode conditioning cable for each link between the wiring closet switches and the network core.
  • D. Change the SR transceivers tor each link between the wiring closet switches and me network core to LRM transceivers

Answer: C

 

NEW QUESTION 45
A mall requires a wireless network upgrade to 802 -Max The company that owns the mall wants to provide the APs for the entire mall. However, several of the larger national chain retailers with spaces in the mall want to offer wireless services with their own SSIDs.
These individual retailers also have their own wireless guest services and wireless client devices They have their own corporate infrastructure and want to handle all of this wireless traffic on their own, including terminating the traffic on their own controllers. The mall requires redundancy for its services, out the retailers do not.
Which plan for mobility controllers (MCs) and mobility master (MW) meets the needs of this scenario?

  • A. two MCs for the mall company and one MC for each retailer with its own SSIDs, all controlled by the same pair of MMs
  • B. a pair of MMs for the mall company, but not MCs: MMs control one MC for each retailer with its own SSIDs
  • C. two MCs for the mail company controlled by a pair of MMS; one standalone MC for each retailer with its own SSIDS
  • D. two MCs for the mall company and for all of the retailers, both controlled by the same pair of MMs

Answer: B

 

NEW QUESTION 46
For which scenario do Aruba CX 6300M Series switches meet the needs for an upgrade of the wired access layer while the Aruba CX 630QF Series switches do not?

  • A. The customer wants to utilize the Aruba AP-515 support for 002 3bz connectivity.
  • B. The Aruba CX6300M supports 10GBase-T connectivity with AP-515.
  • C. The Aruba CX 630DM support up to 75W PoE+ per port
  • D. The customer wants to utilize LACP on AP515 in VSF switch configuration.

Answer: C

 

NEW QUESTION 47
Refer to the exhibit.

A stadium wants to deploy location-based services, including blue-dot wayfinding over a 200.000 square root (isr580 sq. m) are a. The custom past particular areas. The customer has selected a 1 year subscription.
The exhibit shows the BOM that the architect created in iris.
Which correction should the architect make?

  • A. Remove one Blue Dot Nav subscription.
  • B. Add another campaign subscription.
  • C. Change the campaign subscription to a Maps subscription.
  • D. Add two Maps subscriptions.

Answer: C

 

NEW QUESTION 48
Refer to the exhibit.

A customer requires a core switching solution for a very large multi-building campus with about 30;ooo wireless clients and devices. The network will have a flat topology as shown in the exhibit, and MCs will forward all wireless traffic to the core for routing.
The customer had considered Aruba 5400R Series switches, but the architect recommends Aruba S320 switches Instead.
How should the architect justify this recommendation?

  • A. The 8320 switches are required to eliminate the aggregation layer as the customer desires.
  • B. The 3320 switches offer more extensive mobility integration features with Aruba MCs and APs than the 54C0R Series switches do.
  • C. The 3320 switches support a higher density of 10GbE fiber ports than the 5400R Series.
  • D. The 8320 switches have greater performance and larger ARP tables than the 54Q0R Series, as is necessary for a network this size.

Answer: B

 

NEW QUESTION 49
......

New HPE6-A80 Dumps - Real HP Exam Questions: https://www.preppdf.com/HP/HPE6-A80-prepaway-exam-dumps.html