[Aug 24, 2021] HPE0-S54 Dumps Full Questions - Exam Study Guide
HPE ASE Free Certification Exam Material from PrepPDF with 110 Questions
NEW QUESTION 24
A customer is considering deploying a significant number of HPE BladeSystem Gen10 servers with an HPE 3Par storage solution for a new cloud solution. You propose HPE OneView as the management platform.
Which HPE OneView feature should you emphasize during conversations with the customer?
- A. volume presentation from the 3Par and automated zoning
- B. servers and storage firmware upgrades
- C. operating system deployment through Image Streamer
- D. patch deployment for operating system and storage components
Answer: A
NEW QUESTION 25
You need to demonstrate the runtime firmware verification scan functionality on a ProLiant DL380 Gen10 server. You find that the option is not available in the UEFI interface.
What is the most likely cause of the problem?
- A. The server boot mode is set to UEFI
- B. The file firmware-ilo5-1.10.1.1.x86_64.rpm is the incorrect version
- C. The required iLO license has not been installed
- D. The Onboard Administrator has not been initialized
Answer: C
NEW QUESTION 26
A customer experiences high response times to their Windows 2016 SQL database that exists on a ProLiant ML 350 Gen10 server. The customer needs to archive the lowest possible disk I/O response times.
Which HPE solutions should you recommend?
- A. Migrate to Enterprise SSD disk drives
- B. Migrate the database to a virtual machine
- C. Install Persistent Memory modules
- D. Install a HPE PCLe Workload Accelerator
Answer: A
NEW QUESTION 27
You want to form a Synergy management ring.
Which component is required?
- A. HPE Synergy 10 Gb Interconnect Link Module
- B. HPE Synergy Composer
- C. HPE Synergy Image Streamer
- D. HPE Synergy Frame Link Module
Answer: D
NEW QUESTION 28
A customer wants to implement HPE Synergy with 20Gb connectivity.
What should an architect emphasize during a meeting with this customer?
- A. 20Gb connectivity will require additional licenses applied to the downlink ports.
- B. SAS connectivity will be supported only on third fabric.
- C. A maximum of 3 frames can be stacked together when 20 Gb connectivity is required.
- D. A Composer must be installed in each frame.
Answer: C
NEW QUESTION 29
A customer has an existing Hadoop installation built on DL380 Gen9 24SFF servers.
You need to review their existing installation and provide recommendations on how to achieve their stated storage density goal of over 5PB per server cabinet.
Which HPE solution should you recommend?
- A. HPE Apollo 6500
- B. HPE Apollo 4510
- C. HPE ML350 Gen10
- D. HPE DL580 Gen10
Answer: B
NEW QUESTION 30
A customer needs to boot from PXE with IPv6 across the Gen10 servers. Which option must be enabled to use this feature?
- A. HPE Intelligent Provisioning with IPv6 DHCP
- B. UEFI Boot with IPv6 enabled
- C. UEFI Secure Boot
- D. Legacy One-Time boot menu
Answer: B
Explanation:
Explanation/Reference: https://support.hpe.com/hpsc/doc/public/display?docId=emr_na- a00028429en_us&docLocale=en_US
NEW QUESTION 31
Match the HPE management tool to the customer situation. (Each customer situation may be used more than once or not at all.)
Answer:
Explanation:
Explanation
Built in tools managing single systems - not used
Cloud-based tools to manage multiple systems - Remote Support and Insight Online Customer site tools to manage multiple systems - HPE OneView and iLO Amplifier Pack
NEW QUESTION 32
A customer needs a new compute environment based on HPE Synergy with VMware vSphere 6.5. This needs to interact with the customer's exiting network consisting of 300 independent global sites. Each site has 15 unique VLANs. What network technologies would you recommend to meet the customer requirements?
- A. RDMA as it increases host efficiency and virtualization performance
- B. VxLAN as it allows flexibility and suitable for multitenant environment
- C. NVGRE increasing the amount of separated Layer 2 segments
- D. VLANs as it supports up to 4094 VLAN ids
Answer: B
NEW QUESTION 33
A customer needs a solution to run a read-intensive workload. You propose the following configuration:
* HPE ProLiant DL380 Gen10 server
* HPE Smart Array P408-p SR
* 6 SFF SAS HDD drives
* 1 SSD drive
* RedHat Enterprise Linux 7.0 operating system
The customer needs to lower latency while minimizing investment in new SSD drives.
Which HPE Storage technology most effectively lowers latency of the HDD storage?
- A. HPE 12Gb SAS Expander
- B. HPE SSD Smart Path
- C. HPE Secure Encryption
- D. HPE SmartCache
Answer: D
NEW QUESTION 34
A customer requires the ability to act rapidly on ideas by creating, consuming, and reconfiguring new solutions, experiences, and business models. Which HPE server platform best meets their needs?
- A. HPE BladeSystem C7000
- B. HPE SimpliVity 380
- C. HPE Synergy
- D. HPE ProLiant Rack Servers
Answer: D
NEW QUESTION 35
Which iLO 5 feature allows a customer to directly, physically connect to a ProLiant server to troubleshoot issues?
- A. iLO Amplifier Pack
- B. iLO Service Port
- C. iLO mobile app
- D. iLO Federation
Answer: C
NEW QUESTION 36
A customer needs to install Red Hat 7.2 on a few DL380 Gen10 systems.
Which tool should be used for this deployment?
- A. Insight Control server provisioning (ICsp)
- B. OneView
- C. Image Streamer
- D. Intelligent Provisioning
Answer: D
NEW QUESTION 37
You want to form a Synergy management ring.
Which component is required?
- A. HPE Synergy 10 Gb Interconnect Link Module
- B. HPE Synergy Composer
- C. HPE Synergy Image Streamer
- D. HPE Synergy Frame Link Module
Answer: D
Explanation:
Explanation/Reference:
NEW QUESTION 38
Your customer is on the verge of spending $1,2M on a new HPE Synergy 120000 deployment for the ERP system. Over the next three years they expect to see $600,000 per year in earnings.
What would the ROI be for the given purchase?
- A. 75%
- B. 20%
- C. 50%
- D. 10%
Answer: B
NEW QUESTION 39
Your customer boots to the HPE Smart Scripting toolkit via PXE to automatically configure their new systems.
They are moving to a new data center which has a policy that PXE boot will not be allowed in the environment.
What is the closest alternative to use when deploying Gen10 in their new data center?
- A. Insight Control server provisioning running the Smart Scripting Toolkit scripts in a build plan
- B. HTTP/HTTPS Boot to the Smart Scripting Toolkit
- C. iLO Federation running the Smart Scripting Toolkit scripts
- D. iLO RESTfull API running the Smart Scripting Toolkit scripts
Answer: B
NEW QUESTION 40
......
Dumps Brief Outline Of The HPE0-S54 Exam: https://www.preppdf.com/HP/HPE0-S54-prepaway-exam-dumps.html